Customer problem: I have received the VAS 6154 device. I install ODIS 5.1.6 on Win7/ 64 bit, but I have a problem connecting to the vehicle (all 3 devices work identically). The first time I connect to a vehicle, it recognizes the vas6154 interface. If I disconnect and reconnect the interface then the interface is no longer visible in ODIS. This appears on USB or WIFI and appears every time. After that I have to shut down ODIS and restart. I’m asking for help!!!vas6154 original vas 6154a
The VCX Manager and ODIS 5.1.6 software cannot be opened at the same time. If you restart the ODIS software and can connect well, it indicates that it can use normally.
Porsche Piwis II V18.150 SSD Win7/32Bit for Piwis II / JDiag Elite II
Porsche Piwis II V18.150 SSD can work with Porsche Piwis II Scanner or Porsche JDiag Elite II Pro Scanner .
It comes with 128GB SSD, Win7 / 32Bit system, can work with most laptops which accept 2.5 inch Sata HDD.
Win7 system SSD makes it run much faster than normal Piwis II software Which run XP system.
There has Standard Mode and Enginner mode inside software, you can switch yourself. The enginner mode only can be in German, no other language for choosing.
Standard mode is multi-Languages, you can change the one you need when using software:
Software Languages:
English
Francais (French)
Italiano
Espanol (Spanish)
Japanese
Chinese
Pyccknn (Russian)
Português (Portuguese)
Nederlands (Dutch)
Deutsch(German)
US English
License is Unlimited, you can use it as long as you want .
Important Notice:
1.This software SSD only for the Piwis II which is Semtec Hardware, not fit for the Piwis ii J2534 Scanner
2. We only offer 1time free active for this software, if you want to active again, it will cost 299USD
3. We do not offer technology support for the enginner mode, please make sure you know how to use it before you switch it.
4. Not offer free update for this SSD
If you want hardware to work with this SSD, you can check Porsche Piwis 2 Hardware.
Here are the pic for the WIN7 Software SSD for your reference:
Along porsche piwis tester iii diagnostic and programming tool released, lots of customers may confused about Porsche tester Piwis 2 or Piwis 3 which one to choose? Is it worth to purchase Piwis 3 replace Piwis 2 now? Can Samtec Piwis 2 compatible with Piwis 3 Software?
Here Autonumen.com will share you Porsche Piwis 3 Compare With Porsche Piwis Tester 2.
High Quality Samtec Piwis 2 tester Wifi Piwis II VCI for Porsche Difference between Porsche piwis 3 and piwis tester 2 VCI?
Porsche Piwis 3 Tester III Diagnostic With V39.500 Software Installed on Lenovo Ready to use
Differences between Porsche piwis tester iii with Piwis tester 2?
First of all, the Piwis 2 interface is a lot more robust piece of equipment, compared to the cheesy and flimsy looking and feeling interface produced by Actia for Piwis 3.
Secondly, Piwis 2 vci latest software 18.15 support till 2018 car models best price from Autonumen.com. Porsche Piwis 3 Tester III Diagnostic With V39.500 Software Installed on Lenovo Ready to use Support all Porsche till 2020 best price $1,229.00. If you have a garage for many newer car models you do better to choose Piwis tester 3.
Third, Porsche PIWIS III which sell with laptop and software installed ready to use. You can get both cases the VCI and software have been modified to disable factory authentication and naturally there is no automatic updates. If you did have a PPN account, this tool would update normally.
After test, VAS 5054A/ VAS 6154 ODIS V4.23 performs good. This post will show you the new functions of the version v4.23, the computer requirement and the support car list.
Item No: sp33-c, sp33-b, SP33-BO, sp308
Computer Restrictions
Windows 10 only supports the new diagnostic interface VAS 6154 (known as the WLAN remote head). Users of the older models VAS 5054, VAS 5054A and VAS 5055 can continue to use the Windows 7 i.do client on existing systems until 2019 or acquire the Windows 7 i.do. client from IT Client Support for replacement devices. The new diagnostic interface can be used with both operating systems. Please place any necessary orders with Workshop Equipment in good time.
VAS 5054A New Functions in version 4.2
The key features newly added or revised in release 4.2 are described briefly in this section and the additional CCB_DS IDs implemented are cited.
CCB 1127 The update check when starting ODIS Service should be "silent". CCB 1140 Functional tester send present request only once CCB 1589 support of new VW cross section load books
CCB2004 Display of a support guideline CCB2015 Farsi (RTL) language support CCB1692 Display connection quality VAS6154 CCB1968 trace records for DoIP CCB2038 Read and display DTC snapshots
Defect resolution in version 4.2
The defects resolved in release 4.2 are described briefly in this section.
19502 In the case of end-of-life vehicles (European market), the diagnostic entry remains at "Waiting for synchronization" hang 16858 Update OS 2.2.4: VAS 6558-6558A ODIS is available twice in the programs and functions after the update. 18569 Flash aborted while flashing the climate control unit via DoIP 18648 OS 3.1 TPI Reference to diagnostics object (Extend inspection plan) Partially not functional 18751 Measurement technology is not automatically removed or uninstalled with ODIS-Service Deinstallation 18891 Softing feature on Windows 10 computer 19131 Control unit 0025 Immobilizer is not automatically identified when boarding the A8_2003 19717 Network status is not detected correctly on OS 4.0 and VAS6154 USB 19182 ODIS Service 4.0.0: The green arrow is missing on the Finish / Next button 19207 Read out identification data, ident status is not displayed in the print log. 19227 Log files are filled with ArrayList messages 19247 ODIS S: different tester present behavior between diagnosis and flashing 19251 OS 4.1.0 Build 41_3_0_1 contains the wrong Diagnostic_Data_Hook 19278 Entering a special character "_" or "-" (underscore, hyphen) is not possible during installation in the host name of VAS 6154 19289 Evaluation of unauthorized event memory incorrect 19296 Saved diagnostic session can not be loaded 19298 Error when logging on to the CPN via the button Infomittel- because of certificate VW-CA-Proc-07 19302 Information about the VCI at the top of the interface disappears when the language is switched 19313 ODIS Service 4.1.3: The diagnostic protocol does not state that communication is via DoIP.
Defect resolution in version 4.2
19318 OS 4.0.0 and 4.1.0: A not yet translated standard text is not displayed in the execution system when using a language as Created, it does not fallback mechanism 19319 OS 4.0.0 and 4.1.0: A text module is not displayed in the execution system when using a language other than Created 19325 OS 4.1.0: When using placeholders with TextIDs, text blocks or ANSI Text modules come back instead of these texts, a NULL. The placeholder (variable) is displayed correctly. 19350 Spelling errors in the setup.configurator: Special characters instead of special characters 19370 OS 4.1.3 Malfunction of the status display of the network connection
Supported vehicles with Version 4.2
Approved AUDI vehicles • All AUDI vehicles are supported
Approved Volkswagen vehicles • All Volkswagen vehicles are supported
Approved Volkswagen Nutzfahrzeuge vehicles • All Volkswagen Nutzfahrzeuge vehicles are supported
Approved Seat vehicles • All Seat vehicles are supported
Approved Skoda vehicles • All Skoda vehicles are supported
Approved Bentley vehicles • All Bentley vehicles are supported
Approved Lamborghini vehicles • The following Lamborghini vehicles are supported: Gallardo from MY09-MY14 (only immobilizer and Radio PIN Code) Aventador und Huracán
Approved Bugatti vehicles • Bugatti Veyron and Bugatti Chiron are supported
This article show a OBDSTAR X300 DP Plus test case on Fiat Delphi 93C66 PIN code reading.If you want to get more test case,check here:OBDSTAR X300 DP Plus test cases.
OBDSTAR X300 DP PLUS is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from OBDSTAR advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result.
Here shares serveral reviews of whether you should buy OBDSTAR X300 DP PLUS ?
Review 1 :What is the difference between Obdstar x300 dp full and Obdstar x300 Dp Plus?
I have Obdstar x300 dp full (Yellow model) and it is working well, only with newer models needs to connect to internet, example: odometer correction to 2015- Ford F150, I just renew the yearly subscription (us$200) and keeps updating almost daily.
OBDSTAR X300 Pro4 have full car list for immo function same as DP Plus. I don’t know if the x300 Dp Plus is substantially better than first model, the difference in price is high. The new x300 dp plus comes with new functions like “ecu programming” and “ecu clone” (I can’t find information on what models can make with those functions), now have a new RFID adapter (P001) and they discontinued the support for the old RFID adapter, no updates. 1.For diagnostics it’s very limited, almost no special functions,. 2.For key programming and pin code retrieval is good, not all brands and models but can make many models without issues. 3.For odometer calibration is good, better than EZ500 (I have this tool too). In my own experience the money invested was worth it. Review 2:It seems like they periodically updating the soft wear The tool itself works , boots up and operate. However the following are what I consider deficient especially since I am in the car repair Buisness . 1- The instruction manual is nort very clear , for instance it does not clarify which charger unit is “specifically for the scanner” and which is not. I had To go on line in order to figure out what the instruction manual is telling me to do when setting the unit up.2- The soft wear for any of its capabilities is not necessarily available right away, it seems like they periodically updating the soft wear. Please not also that the odometer programming is not available for all vehicles such as Toyota, BMW, to name few.In all I would say the price is too much for a scanner that does not give you clear and precise guidance as to how to manipulate its capabilities And one that is still lacking necessary soft wear for cars that I work on all the time.
16 people found this helpful Review 3: Full VS Standard is the difference between key programmer with or without diagnostic function.
I purchased this product after researching for months. The ease of use, the support that comes from other compatible models and accessories that come with it are very simple to configure.
My main complaint is that it doesn’t come with a key renew adapter which I find more useful than all of the older adapters they include including the eprom adapter.
It also does have any diagnostic compatibility for any domestic cars other than dodge and ford. Very irritating when I tried to use it to diagnose an abs issue the first day I had it Review 4: The translation isn’t the best, features aren’t up to date like you’d expect it, and it’s funny how newer bmws can be done but no support for old Review 5:
I purchased this product after researching for months. The ease of use, the support that comes from other compatible models and accessories that come with it are very simple to configure. Review 6: OBDSTAR X300 DP Plus Programming Key Megane 4 Model 2016
OBDStar X300DP Plus FAQ:
Q: Does the tool remain available to use after the one year update? A: Yes, you still can use it after one year update
Q: If i keep 2 years without updating how can i update it after? will i need to pay for all the previous updates? A: You just need pay one year update cost, it is ok
Q: Does x300 dp plus support 2017 Nissan X-Trail programming? A: It support smart key programming for this car
Q: Will this work a 2010 Honda accord key programming? A: Usa Accord Immobiliser 2008-2012 2013 Asia Accord 2002-2008 Australia Accord 2008- Europe Accord 2009- Please check which area your accord belong to?If it is Aisa Accord, then not support, if from other area, then it support.
Q: Can i do ecu replacement/programing on peugeot 406 & 308 with this tool? A: Yes
Q: Will this support odometer programming for 2013 volvo s60, 2013 ford f-150, or 2015 dodge ram? A: Yes, it does
Q: If obdstar x300 dp plus includes HAIMA-17 adapter? A: No, this adapter not included.
One customer gave the feedback that he failed to add a key for Nissan Micra 2003 All Keys Lost by OBDSTAR X300 DP PLUS. Our technical support believes the chip may be the cause but do not exclude other reasons. Because of limited information, here we try to provide a probable approach to the problem.
Solution:
The main reason is that the new key’s chip could not be recognized, so we may need to work the transponder by other tools first.
Here we take a Nissan ID 46 transponder original key by Xhorse Key Tool Max for an example.
Step 1. Read Transponder
Insert the original key into the coil of Key Tool Max.
Press
Transponder Clone>>Read Transponder
Wait to see what transponder is in it.
Here we can see it’s got a transponder 46 chip.
Then back to Homepage. Press
Vehicle Remote>>Nissan>>Nissan ID46 13-17 Micro
Step 2. Generate Remote
Insert the new key into the coil.
Press “Generate remote” and wait…burn success. If All Keys Lost like this customer, go ask the dealer about what transponder is in the key.
It seems an ID 4D607 transponder judged by the image.
Then skip the Step 1, just do the Step 2 to generate new key’s transponder.
Now we can take this new key out to the vehicle and use OBDSTAR X300 PAD2 to program it.
Apart from the reason, care two prompts.
One is “Program Smart Keys will erase all keys”, so you need to cycle in all keys you have as the prompt.
The other one is “Take all smart keys out of the car” after you choose “Program Smart Keys” function.
1.Full touch screen 2.One button upgrade 3.Real time data interaction with PC via USB 4.World top R & D team, professional after-sales group to service 5.98% coverage rate for digital odometer, airbag modules, car radios,car immobilizers 6.Simple and clear operation interface
How to release memory space When you see this message on screen, it means have no more space in memory to save your dump. So please as following:
1.Connect device to PC by usb cable,run “Windows Mobile center” on PC and choose “connect without setting up your device”
2.Open “Residentflash”
3.Delete files from “backup” “ododata” “userdata” folders,also can backup them to PC if needed.
IN addition,when doing software update, will show the window as below 2 times,just click “ok”. If you renamed,please delete new folder you named from residentflash and update again.
1.If your Porsche VCI diagnostic interface does not work or even keeps making noises, you need to reset your VCI at this time to restore factory settings;
2.Operation steps, first, you press and hold the round button in the middle of the Porsche diagnostic connector, connect to the base station after 5 seconds, do not release the pressed finger, connect to the base station, release your finger after 30 seconds, and wait for the piwis software The base station is detected (if the base station connection cannot be detected, you can repeat the operation)
3.After the base station is successfully connected, click”System”-”VCI configuration”-”Perform pairing now”,Complete the factory reset, if you still need to set up the wireless connection VCI, you need to click “WLAN access piont”-set your VCI wireless password.