Activate 2020 MB star SD C5 Mercedes Xentry with Panasonic toughpad tab scanner with 2012.11 version of the software.

Have tried to update the mux but saying battery too low.

Solution:

Your MB Star C5 host needs to install a new battery before proceeding with the firmware upgrade. Please buy new battery: 6 units Ni-MH Rechargeable batteries, Size: AA, Voltage: 1.2V.

Please follow this article on how to install battery for C5

For new sdconnec C4 Plus / MB SD C5 with DoIp, you can update the firmware without installing battery.

VAS5054A/VAS 6154 ODIS Software newly update to V6.10.

ODIS-6.10-SOFTWARE-DOWNLOAD

ODIS 6.10 Download Link: https://share.weiyun.com/0mueutt8

Password:q183lh

ODIS-6.10

ODIS 6.10 Software Update Features:

Supproted Vechiles :

-All AUDI vehicles

-All Volkswagen

-All Volkswagen Nutzfahrzeuge vehicles

-All Seat

-All Skoda

-All Bentley

-The following Lamborghini vehicles are supported:

Gallardo from MY09-MY14 (only immobilizer and radio PIN code), Aventador, Huracán and Urus

Approved Bugatti vehicles

-Bugatti Veyron and Bugatti Chiron

-MAN-TGE

ODIS 6.10 Support languages:

English/ Japanese/ Portuguese/ Romanian/ Korean/ Dutch/ Polish/ Turkish/ Spanish/ French/ Italian/ Croatian/ Danish/ German/ Swedish/ Finnish/ Slovenian/ Czech/ Russian/ Greek/ Chinese

ODIS 6.10 Hardware requirement:

CPU minimum 2GHz recommended
RAM >= 2 GB
Free hard disk storage > 15 GB, standard file system NTFS
The software uses standard windows installation paths
ODIS 6.10 Supported (diagnostic-) hardware:

Getac S410 / Getac S410 Performance
Panasonic CF-53-MK4
Panasonic CF-54
ODIS 6.10 Software requirement:

VAS6154: Windows 7 (64bit recommended) or Windows 10,USB connectivity is recommended.
VAS5054A: Windows 7 (64 bit recommended)

Installed libraries (DLL) for Microsoft Visual Studio 2010:
vcredist_x86.exe (included in Windows 7)

Installed Visual C++ Redistributable x86 for Microsoft Visual Studio 2010:
vcredist_x86.exe (included in Windows 7)

Internet Explorer 11.0
Adobe Acrobat Reader Version 11 or Adobe Acrobat Reader DC
Font “Arial Unicode MS Regular”

VAS6154 interface is a dealer lever diagnostic tool for VAG group vehicles, comes with OKI chips, supports diagnostics, online/offline programming.

Supports all VW, Audi, Skoda erc. including NEW & FUTURE MODELS in production, WIFI and USB connection.

VAS6154 Interface Overview

1. Multi-language (CD Software): English, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech, Russian, Greek, Chinese

2. CD ODIS Software Version: V6.10 , only odis engineering software available, no etka and elsawin, latest ODIS full software V7.11 check at VXDAS.COM

3. Operating system: Vas 6154 works perfect with windows10​.

4. Support WIFI & USB Connection: With wireless communication technology, can achieve wireless communication of the vehicle and diagnostic interface

5. Support for VW for Audi for Skoda vehicles NEW & FUTURE MODLES under production.

6. With OKI Chip, support UDS protocol

7. This VAS 6154 Interface is the latest interface for the diagnostic and programming applications VAG ODI-S (Service) and ODI-S-E (Engineering), it replaces the V-AS 5054.

VAS6154 ODIS Software Functions

Estimated remaining times are shown for ECU flash operations.

Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view, used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests

The measured value display has been improved.

Documents in GFF are displayed in separate windows.

One message box will be shown at the beginning of the test drive mode.

GFF hotfixes can be integrated during diagnostic sessions.

Danger messages have been revised.

Stopping of diagnostic sessions may be interrupted.

Automatic deletion of autosave diagnostic protocols after successful transmission.

Selection of PassThru diagnostic hardware has been improved.

ODI-S Service Software update has been stabilized

Support UDS Protocol
VAS6154 License Expired Solution

Many customers replied that license has expired prompt showed when using device, how to solve it?

A: Download latest drive and install it.

VAS6154 latest drive download link:

https://mega.nz/file/hK4EHC5Z#UDTKR4VsMEnqn644Kb_YrJBa__1h845JOG4d2tBz7mA

End.

Tacho Programmer Digital Tachograph Programmer CD400 TRUCK TACHO Speedometer

1.What is a tachograph?
What is a tachograph? Basically, a tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk. The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver.

2.Description
2.1 Technical specifications
Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char)
White LED backlight
Size: 150 x 100 x 45 mm
Supply voltage: 9 to 30 VDC
Supply current: 12mA
Case: green-blue ABS (IP40).
Operating temp: -20…+70°C
Weight: 155g

2.2. Keyboard – Alternate function keys ‘F1’, ‘F2’ & ‘F3’ are active when a function in inverted video appears on the bottom line of the display.
F1= MODIFY, F3=OK
– Alernate function key ‘↑’ & ‘↓’ are used for example to navigate the menus.
– Alernate function key ‘←’ & ‘→’ are used to select the digit in some parameters.
– ‘Ent’ (=Enter) is used to select a function or enter a value.
– ‘Esc’ key is used to go back in the menu, leave a function, to erase the last digit entered and to switch the programmer ON & OFF when powered by the battery.

2.3. Connections
– Left connector: Serial port for software upgrade (upgrade cable).
– Center connector: Connection for crocodile clip cable (K13xx/K1318).
– Right connector: Connection for tachograph cable.

3.Operation

3.1.Power supply and tachograph type detection For all tachograph types, except for the K13xx/1318 and the FTCO1319, the programmer is powered by the tachograph itself. An automatic tachograph type detection is executed on power ON, so don’t switch the programmer ON, simply connect it to the tachograph with the appropriate cable. The programmer will switch ON and detect the tachograph type. In the case of the K13xx/1318 and the FTCO1319, switch the programmer ON pressing the ‘I/O’ key. If the FTCO1319 is connected, the programmer will detect it. To switch the programmer OFF, press and hold the ‘I/O’ key. If no tachograph is detected, the K13xx/1318 will be selected by default. OOn power ON, the programmer will display the product information (Software version, Serial number, etc…), then the menu for the tachograph type detected.