Porsche Piwis II V18.150 SSD Win7/32Bit for Piwis II / JDiag Elite II

Porsche Piwis II V18.150 SSD can work with Porsche Piwis II Scanner or Porsche JDiag Elite II Pro Scanner .

It comes with 128GB SSD, Win7 / 32Bit system, can work with most laptops which accept 2.5 inch Sata HDD.

Win7 system SSD makes it run much faster than normal Piwis II software Which run XP system.

There has Standard Mode and Enginner mode inside software, you can switch yourself. The enginner mode only can be in German, no other language for choosing.

Standard mode is multi-Languages, you can change the one you need when using software:

Software Languages:

English

Francais (French)

Italiano

Espanol (Spanish)

Japanese

Chinese

Pyccknn (Russian)

Português (Portuguese)

Nederlands (Dutch)

Deutsch(German)

US English

License is Unlimited, you can use it as long as you want .

Important Notice:

1.This software SSD only for the Piwis II which is Semtec Hardware, not fit for the Piwis ii J2534 Scanner

2. We only offer 1time free active for this software, if you want to active again, it will cost 299USD

3. We do not offer technology support for the enginner mode, please make sure you know how to use it before you switch it.

4. Not offer free update for this SSD

If you want hardware to work with this SSD, you can check Porsche Piwis 2 Hardware.

Here are the pic for the WIN7 Software SSD for your reference:

After test, VAS 5054A/ VAS 6154 ODIS V4.23 performs good. This post will show you the new functions of the version v4.23, the computer requirement and the support car list.

Item No: sp33-c, sp33-b, SP33-BO, sp308
                                  
Computer Restrictions

Windows 10 only supports the new diagnostic interface VAS 6154 (known as the WLAN remote head). Users of the older models VAS 5054, VAS 5054A and VAS 5055 can continue to use the Windows 7 i.do client on existing systems until 2019 or acquire the Windows 7 i.do. client from IT Client Support for replacement devices. The new diagnostic interface can be used with both operating systems. Please place any necessary orders with Workshop Equipment in good time.


VAS 5054A New Functions in version 4.2

The key features newly added or revised in release 4.2 are
described briefly in this section and the additional CCB_DS IDs implemented are cited.

CCB 1127       The update check when starting ODIS Service should be "silent".
CCB 1140       Functional tester send present request only once
CCB 1589        support of new VW cross section load books

CCB2004         Display of a support guideline
CCB2015         Farsi (RTL) language support
CCB1692         Display connection quality VAS6154
CCB1968         trace records for DoIP
CCB2038         Read and display DTC snapshots


Defect resolution in version 4.2

The defects resolved in release 4.2 are described briefly in this section.

19502  In the case of end-of-life vehicles (European market), the diagnostic entry remains at "Waiting for synchronization" hang
16858  Update OS 2.2.4: VAS 6558-6558A ODIS is available twice in the programs and functions after the update.
18569  Flash aborted while flashing the climate control unit via DoIP
18648  OS 3.1 TPI Reference to diagnostics object (Extend inspection plan) Partially not functional
18751  Measurement technology is not automatically removed or uninstalled with ODIS-Service Deinstallation
18891  Softing feature on Windows 10 computer
19131  Control unit 0025 Immobilizer is not automatically identified when boarding the A8_2003
19717  Network status is not detected correctly on OS 4.0 and VAS6154 USB
19182  ODIS Service 4.0.0: The green arrow is missing on the Finish / Next button
19207  Read out identification data, ident status is not displayed in the print log.
19227  Log files are filled with ArrayList messages
19247  ODIS S: different tester present behavior between diagnosis and flashing
19251  OS 4.1.0 Build 41_3_0_1 contains the wrong Diagnostic_Data_Hook
19278  Entering a special character "_" or "-" (underscore, hyphen) is not possible during installation in the host name of VAS 6154
19289  Evaluation of unauthorized event memory incorrect
19296  Saved diagnostic session can not be loaded
19298  Error when logging on to the CPN via the button Infomittel- because of certificate VW-CA-Proc-07
19302  Information about the VCI at the top of the interface disappears when the language is switched
19313  ODIS Service 4.1.3: The diagnostic protocol does not state that communication is via DoIP.


Defect resolution in version 4.2

19318  OS 4.0.0 and 4.1.0: A not yet translated standard text is not displayed in the execution system when using a language as Created, it does not fallback mechanism
19319  OS 4.0.0 and 4.1.0: A text module is not displayed in the execution system when using a language other than Created
19325  OS 4.1.0: When using placeholders with TextIDs, text blocks or ANSI
Text modules come back instead of these texts, a NULL. The placeholder (variable) is displayed correctly.
19350  Spelling errors in the setup.configurator: Special characters instead of special characters
19370  OS 4.1.3 Malfunction of the status display of the network connection


Supported vehicles with Version 4.2

Approved AUDI vehicles
•   All AUDI vehicles are supported

Approved Volkswagen vehicles
•   All Volkswagen vehicles are supported

Approved Volkswagen Nutzfahrzeuge vehicles
•   All Volkswagen Nutzfahrzeuge vehicles are supported

Approved Seat vehicles
•   All Seat vehicles are supported

Approved Skoda vehicles
•   All Skoda vehicles are supported

Approved Bentley vehicles
•   All Bentley vehicles are supported

Approved Lamborghini vehicles
•   The following Lamborghini vehicles are supported:
Gallardo from MY09-MY14 (only immobilizer and Radio PIN Code) Aventador und Huracán

Approved Bugatti vehicles
•   Bugatti Veyron and Bugatti Chiron are supported

Approved MAN vehicles
•   MAN-TGE is supported